Saturday, March 1, 2014

HP Compaq NC6000 Power On Password SOLVED


HP Compaq NC6000 Power On Password SOLVED

1. Remove main AC power and Battery

2. Remove the keyboard. (2 silver colored screws on the bottom, Torx T8)

3. Pull the 4 tabs that hold the keyboard in place towards you. (small tabs between the function keys)

4. Lift the keyboard.

5. Locate the litte cable that goes from Cmos battery to mainboard. The leads from the battery colors black & red wires run up the motherboard and plug in next to the ribbon cable for the touchpad.

Remove the connector from mainboard.

5. Wait for about 30 min or onward and reconnect.

6. Power up with AC power, NOT with Laptop battery in it.


Password will be gone.

REMEMBER THIS!
In my case i made it a whole day before i reconnect all of the parts.

Make sure that the Laptop Battery is Detached before turning it On.

Good Luck & Enjoy.

0 comments to “HP Compaq NC6000 Power On Password SOLVED”

Post a Comment

 

Download Software Copyright © 2016 -- Powered by Blogger